Deployed Devices Monitored Via Unc-Nms Controller - Planet UNC-NMS Quick Installation Manual

5. Deployed Devices Monitored via UNC-NMS Controller

The UNC-NMS can monitor all the deployed wired or wireless NMS-500/NMS-1000V
agent level network devices, and it also can monitor the devices under the NMS
agents, such as managed switches, media converters, routers, smart APs, VoIP
phones, IP cameras, etc. compliant with the SNMP Protocol, ONVIF Protocol and
PLANET Smart Discovery utility.
Please regularly check PLANET website for the latest compatibility list of
managed devices.
Follow the steps below to set up the UNC-NMS server and NMS-500/NMS-1000V
agent devices.
Step 1: Connect the devices, UNC-NMS Controller and your computer to the same
network. The NMS agent devices can set up in the other sub-net network
environment.
Managed AP
PoE
PoE
IP Camera
Step 2: In UNC-NMS system, add a new site with NMS agent devices, such as
NMS-500 and NMS-1000V and then create a certificate file import in to
the NMS agent devices. It may need to build a VPN tunnel between UNC-
NMS and NNS-500/NMS-1000V when the connection will go through the
internet.
The NMS-500 and NMS-1000V FW version must be v1.0b220503
for the above setup.
Note
10
Managed PoE Switch
10.1.20.X
UNC-NMS
Default: 192.168.1.100
or
NMS-1000V NMS-500
10.1.20.X