Chapter 1.Configuring The Ap And Login The Controller; Operation Mode - Planet WAPC-1232HP User Manual

Ap management wireless ap controller with 8-port 802.3at poe+

Hide thumbs Also See for WAPC-1232HP:

Table of Contents

Chapter 1. Configuring the AP and Login the Controller

In this manual, we use the WDAP-C7200AC managed AP as an example to be controlled by the WAPC-1232HP

Wireless AP Controller with 8-Port 802.3at PoE+.

Before configuring the WDAP-C7200AC in the managed AP mode to be managed by the AP controller, please

ensure you have upgraded the AP to the firmware that supports the AP controller.

After the upgrade is finished, please go to the "Management-> Reload Settings" page to upload the latest config

file included in the firmware package file. After the upload for the configuration is finished, please reset the AP to the

factory default.

Follow the steps below to set up the operation mode of the WDAP-C7200AC in the "Managed AP" mode.

Step 1.

To access the WDAP-C7200AC, open a web-browser and enter the default IP address

http://192.168.1.253

After a moment, a login window will appear. Enter admin for the User Name and Password, both in lower case

letters. Then click the OK button or press the Enter key.

in the web address field of the browser.

Figure 1-1 Login by default IP address

User Manual of WAPC-1232HP

-1-

Table of Contents