Deployed Devices Monitored Via Nms-1000V Controller - Planet NMS-1000V Quick Installation Manual

3. Deployed Devices Monitored via NMS-1000V
Controller
The NMS-1000V can monitor all the deployed wired or wireless PoE industrial–
grade network devices, such as managed switches, media converters, routers,
smart APs, VoIP phones, IP cameras, etc. compliant with the SNMP Protocol,
ONVIF Protocol and PLANET Smart Discovery utility.
Please regularly check PLANET website for the latest compatibility list of managed
devices.
Follow the steps below to set up the device from the "Standalone device" mode
to the "Managed device" mode.
Step 1. Connect the devices, NMS-1000V Controller and your computer to the
same network.
Managed AP
PoE
PoE
IP Camera
Step 2. Switch: Log in to the switch's Web user interface and enable the SNMP
and LLDP function.
AP: Log in to the AP's Web user interface to configure the AP to
"Managed AP". In support of SNMP AP, enable the SNMP function.
IP Cam: The ONVIF function is enabled by default.
Managed PoE Switch
192.168.1.x
NMS-1000V
Default: 192.168.1.100
11