Setting Up The Monitor - Compaq TFT8030 User Manual

Setting Up the Monitor

TFT8030 User's Guide
To set up the monitor, ensure that the power is turned off
to the monitor, computer system, and other attached
devices, then follow these steps:
This monitor has multiple connectors on the back panel
that can be used to connect two computers
simultaneously to the monitor. Be sure the Video
Channel Select button on the front of the monitor is set
to the correct position to receive signals from the
connected computer. See the Front Panel Controls table
for more information.
1. Place the monitor in a convenient, well-ventilated
location near your computer.
2. Connect the signal and AC power cables to the
monitor 1. Refer to the next section, "Connecting
the Signal Cables," for additional information.
3. Connect the monitor signal cable 2 to the
appropriate video connector on the rear panel of the
computer.
4. Connect the AC end of the power cable 3 to AC
receptacle on the monitor.
5. Connect the power cable 4 to an electrical wall outlet.
3