Product Features; Setting Up The Monitor - Compaq TFT500 User Manual

Product Features

Setting Up the
Monitor
1-2 English
The monitor features include the following:
15.1-inch (38.35 cm) viewable area display
Screen customizing adjustments displayed on-screen in five
different languages: English, Dutch, French, German, and
Spanish
Universal Serial Bus Hub interface—plug and play
connectors for use with USB peripherals (mouse, etc.)
Plug and play capability if supported by your system
Fault Management and Asset Control
Desk arm mount (optional)
Automatic scanning with screen expansion
1024 × 768 (XGA) resolution
Wide viewing angle to allow viewing from a sitting or
standing position, or moving side-to-side
Energy Saver feature
Compliant with the following regulated specifications:
Swedish MPR II 1990
EPA Energy Star
European Union CE Directives
Swedish TCO 1995
To set up the monitor, ensure that the power is turned off to the
monitor, computer system, and other attached devices, then
follow these steps:
1. Place the monitor in a convenient, well-ventilated location
near your computer.
2. Connect the monitor signal cable 1 to the 15-pin connector
on the rear panel of the computer and tighten the screws.