Rheem TRITON GHE80SS Service Training Manual page 19

USER INTERFACE
ALARMS - The current alarms function allows you to see any
problems that have been detected by your water heater. Also,
by selecting on the current alarm you can press "more info" to
read more on the current problem of your water heater. Alarm
history allows you to see any of the previous alarms that have
gone off in the past and give you the ability to clear those previ-
ous alarms.
current alarms
A007 Exhaust Switch open. Check Wiring/Venting
By selecting "more info" you can be
given a more in-depth explanation of
the current alarm.
Trouble-Shooting
A007 Exhaust Switch open. Check Wiring/Venting
Check switch wiring and venting. If problem
persist, please contact technical support or
service provider.
ALARM HISTORY - The alarm history function allows you to
see the previous alarms that have been detected by your water
heater in the past.
alarm history
14:48:13 01/11/17 A007 Echaust Switch open. Check wiring/venting
SYSTEM HEALTH - The system health function allows you to
see the current health of your hot water heater's combustion
more
clear
info
clear
19
health and tank health status. The combustion health and tank
health each have three levels of health:
This symbol will appear on your home
screen if your combustion health is crit-
ical. Pressing this icon will take the user
to the Health Status Screen
warm
Settings
Combustion Health:
1. Normal operation -no
action needed
2. Reliability Decreasing
-begin planning for service
and/or replacement.
3. Needs Servicing - contact
your service provider
Combustion Health Status: Operating Normally
Tank Health Status: Powered Anode Protecting Tank
Lifetime Heating Cycles:
Lifetime Run Time Hours:
The health of your system's combustion system and overall health can
be seen here. This screen be accessed by tapping the health indicator
SERVICE ALERTS - By selecting the Service alerts function
you will be able to adjust how often you want to be alerted to
drain and inspect the tank, clean the drain trap, check the vent-
ing, and to replace the neutralizer.
Drain & Inspect Tank:
Check Venting:
Clean Drain Trap:
Replace Neutralizer:
By selecting an option and then using the up and down arrow, you
can set how often you'd like to be alerted to system maintenance.
Rheem TRITON
Service Manual
This symbol will appear if your tank
health status has reached critical.
Pressing this icon will take the user
to the System Health Screen
Status: Standby
120°
hot very hot
Status Disable
Service
Tank Health:
1. Powered anode protecting
tank - no action needed
2. Anode protection ending
-begin planning for service
and/or replacement.
3. Anode no longer protecting
tank. -contact your service
provider.
system health
6
(typical 10K cyc/yr)
750.0
(typical 2K hrs/yr)
baseline init
icons on the home screen.
service alerts
Enabled 9 months 9.0 left
Enabled 6 months 6.0 left
Enabled 1500 hours 1500 left
Enabled 1500 hours 1500 left
TM