Rheem GG50T06PVT Use And Care Manual

Rheem GG50T06PVT Use And Care Manual

Powervent series

Advertisement

WARNING:
!
suitable for use in manufactured (mobile) homes!
!
WARNING: If the information in these instructions is not followed exactly,
a fire or explosion may result causing property damage, personal injury or death.
FOR YOUR SAFETY!
!
— Do not store or use gasoline or other flammable
vapors or liquids or other combustible materials in
the vicinity of this or any other appliance. To do
so may result in an explosion or fire.
— WHAT TO DO IF YOU SMELL GAS
● Do not try to light any appliance.
Do not touch any electrical switch; do not use
any phone in your building.
Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.
El manual en Español está
disponible en www.rheem.com.
Printed in USA
This water heater is not

Water Heaters

The purpose of this manual is twofold: one, to provide the installer with the basic directions
and recommendations for the proper installation and adjustment of the water heater;
and two, for the owner–operator, to explain the features, operation, safety precautions,
maintenance and troubleshooting of the water heater. This manual also includes a parts
list.
It is very important that all persons who are expected to install, operate or adjust this
water heater read the instructions carefully so they may understand how to perform
these operations. If you do not understand these instructions or any terms within it, seek
professional assistance.
Any questions regarding the operation, maintenance, service or warranty of this water
heater should be directed to the seller from whom it was purchased. If additional
information is required, refer to the section on "If you need service."
Do not destroy this manual. Please read carefully and keep in a safe place for future
reference.
!
Recognize this symbol as an indication of Important Safety Information!
!
California Proposition 65 Warning: This product contains chemicals known to
the State of California to cause cancer, birth defects or other reproductive harm.
Use & Care Manual
With Installation Instructions for the Installer
®
Gas Residential -
Residential 40 and 50 Gallon
If you cannot reach your gas supplier, call
the fire department.
Do not return to your home until authorized
by the gas supplier or fire department.
— Improper installation, adjustment, alteration,
service or maintenance can cause property
damage, personal injury, or death . Refer to
this manual. Installation and service must be
performed by a qualified installer, service agency
or the gas supplier.
Manufactured under trademark license by:
Rheem Manufacturing Company
2600 Gunter Park Drive East, Montgomery, AL 36109
®
FVIR Certified
AP15765 (05/10)

Advertisement

Table of Contents
loading

Summary of Contents for Rheem GG50T06PVT

  • Page 1: Water Heaters

    With Installation Instructions for the Installer ® Gas Residential - Water Heaters Residential 40 and 50 Gallon The purpose of this manual is twofold: one, to provide the installer with the basic directions and recommendations for the proper installation and adjustment of the water heater;...
  • Page 2: Table Of Contents

    Safety Information Safety Precautions..3–6 LP Gas Models ... . 5 Installation Instructions Location ....7 Water Supply Connections .
  • Page 3: The Water Heater

    IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. Be sure to read and understand the entire Use and Care Manual before attempting to install or operate this water heater. It may save you time and money. Pay particular attention to the Safety Instructions. Failure to follow these warnings could result in serious bodily injury or death.
  • Page 4: Water Temperature Setting

    IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. DANGER! WATER TEMPERATURE SETTING Safety and energy conservation are factors to be considered when selecting the water temperature setting of a water heater’s thermostat. Water temperatures above 125°F can cause severe burns or death from scalding. Be sure to read and follow the warnings outlined on the label pictured below.
  • Page 5 LP or natural gas, ask the gas supplier. Other conditions, such as “odorant fade”, which causes the odorant to diminish in intensity, can also hide or camouflage a gas leak. Water heaters utilizing LP gas are different ●...
  • Page 6: Safety Precautions

    FOR INSTALLATIONS IN THE STATE OF CALIFORNIA California Law requires that residential water heaters must be braced, anchored or strapped to resist falling or horizontal displacement due to earthquake motions. For residential water...
  • Page 7: Location

    FVIR certified gas water heaters can be the vicinity of this or any installed on a residential garage floor gas appliance. without the use of an 18-inch stand in accordance with the National Fuel Gas Code, NFPA 54, ANSI Z223.1, unless...
  • Page 8: Inspect Shipment

    Installing the water heater. Inspect Shipment Inspect the water heater for possible damage. Check the markings on the rating plate of the water heater to be certain the type of gas supplied corresponds to the water heater requirements. Combustion and Ventilation Air Ventilation (ambient) air temperature must be 100°F or less.
  • Page 9: Thermal Expansion

    Thermal Expansion Determine if a check valve exists in the inlet water line. Check with your local water utility. It may have been installed in the cold water line as a separate back flow preventer, or it may be part of a pressure reducing valve, water meter or water softener.
  • Page 10: Relief Valve

    Installing the water heater. A new combination temperature and pressure relief valve, complying with the Standard for Relief Valves and Automatic Gas Shut-Off Devices for Hot Water Supply Systems, ANSI Z21.22, is supplied and must remain in the opening provided and marked for the purpose on the water heater.
  • Page 11: Gas Supply

    WARNING: Do not attempt to convert this water heater for use with a different type of gas other than the type shown on the rating plate. Such conversion could result in hazardous operating conditions. Gas Supply The branch gas supply line to the water heater should be clean 1/2”...
  • Page 12: Venting

    Installing the water heater. The water heater must be installed with the factory supplied blower assembly in place. Venting DANGER: Failure to install the blower The water heater must be vented to assembly and properly the outdoors as described in these vent the water heater to instructions.
  • Page 13: Maximum/Minimum Vent Lengths For Residential

    Maximum and Minimum Vent Lengths for Residential Maximum Models Altitude for 2” & 3” Vents 43VP40SE2, 43VP40SPE2, 5,999’ 43VP50SE2, 43VP50SPE2 43VP40E2, 43VP40PE2, 7,700’ 43VP50E2, 43VP50PE2 NOTICE: The mixing of 2" and 3" vent pipe is not recommended. If 3" pipe is used, a 2" to 3" bell coupling is recommended at the rubber coupling.
  • Page 14 Installing the water heater. NOTICE: All pipe, fittings, solvent cement, primers and procedures must conform to American National Standards Institute and American Society for Testing and Materials (ANSI/ASTM) standards. Soffit vents Inside corner Electric meter 18" 18" 3' above if within 10' 12"...
  • Page 15: Vertical Vent Termination Location

    NOTICE: All pipe, fittings, solvent cement, primers and procedures must conform to American National Standards Institute and American Society for Testing and Materials (ANSI/ASTM) standards. Vent Pipe From Water Heater Pipe Coupling Insert 1/2" Mesh Protective Screen Inside Terminal Elbow Min.
  • Page 16 Installing the water heater. Draining the Condensate In certain conditions, installations in unconditioned space or having long horizontal or vertical runs may accumulate condensate. In order to prevent condensate from draining back into the water heater installing a condensate trap and drain is recommended in a horizontal vent section as close as practical to the water heater vent connection.
  • Page 17: Wiring Diagram

    Wiring If local codes permit, the water heater may be connected to electric service with the power cord provided (DO NOT use an extension cord). A grounding receptacle is required. If local codes do not permit the use of cord connections, a 120 V, 50/60 Hz power supply, with suitable disconnecting means, must be connected to the black and white leads in the heater control...
  • Page 18: Pipe Insulation

    Insulation Blankets Insulation blankets, available to the general public, for external use on gas WARNING: If local water heaters are not necessary. The codes require external purpose of an insulation blanket is to application of insulation reduce the standby heat loss encountered blanket kits the with storage tank heaters.
  • Page 19: Heat Traps

    Heat Traps For increased energy efficiency, some water heaters have been supplied with factory installed 3/4” NPT heat traps in the hot outlet line and cold water inlet line. During Installation of this water heater... ❑ that it is within the range specified on the rating plate.
  • Page 20: Installation Checklist

    Installation Checklist A. Water Heater Location ❑ Close to area of vent. ❑ Indoors and protected from freezing temperatures. ❑ Proper clearance from combustible surfaces observed and water heater not installed on carpeted floor. ❑ Sufficient fresh air supply for proper operation of water heater.
  • Page 21: Potable/Space Heating

    Supplemental instructions for gas water heaters installed in potable/space heating applications. Local codes or plumbing authority requirements may vary from the instructions or diagrams provided in this manual and take precedent over these instructions. Combination Potable and Space Heating Application...
  • Page 22: Lighting Instructions

    Lighting the water heater. Before operating this water heater, be sure to read and follow the instructions on the label pictured below and all other labels on the water heater, as well as the warnings printed in this manual. Failure to do so can result in unsafe operation of the water heater resulting in property damage, personal injury, or death .
  • Page 23: Water Temperature

    Operating the water heater. CAUTION: Hydrogen gas can be produced in a hot water system served by this water heater that has not been used for a long period of time (generally two weeks or more). HYDROGEN GAS IS EXTREMELY FLAMMABLE!! To dissipate such gas and to reduce risk of injury, it is recommended that the hot water faucet be opened for several minutes at the kitchen sink before using any electrical appliance connected to the hot water system.
  • Page 24 Operating the water heater cont. Water Temperature Setting… The following is additional information which aid in determining a safe working temperature to meet each household need. Maximum water temperatures occur just after the burner has shut off. To deter- mine the water temperature, turn on a hot water faucet and place a thermometer in the water stream.
  • Page 25: Sequence Of Operation

    Sequence of Operation… During initial start-up or a call for heat, the control will verify the vacuum switch is open. 2. Once the control verifies the blower vacuum switch is open, the control will energize the blower motor for the pre-purge sequence (approximately 5 seconds).
  • Page 26: Care And Cleaning

    Care and cleaning of the water heater. Draining the Water Heater water heater at the gas control (thermostat) gas cock or manual shut-off valve before draining water. operating the temperature and pressure relief valve, make certain no one will be exposed to the hot water released by the valve.
  • Page 27: Vent System Inspection

    Housekeeping Visually inspect hot surface ignitor. DANGER: Combustible materials, such as To ensure sufficient ventilation and combustion air supply, proper clearances clothing, cleaning must be maintained. materials, or flammable liquids, etc., must not be placed against or next to the water heater. Venting System Inspection The water heater’s internal flue must be inspected annually to be certain it is clean...
  • Page 28: Extended Shut-Down

    Care and cleaning of the water heater. Vacation and Extended Shut-Down NOTICE: Refer to If the water heater is to remain idle for an the Hydrogen Gas extended period of time, the power and Caution in the Operating water to the appliance should be turned Instructions.
  • Page 29: Troubleshooting Tips

    Before You Call For Service… Troubleshooting Tips Save time and money! Review the charts on the following pages first and you may not need to call for service. This water heater incorporates a combustion shut off device that shuts the operation of the water heater down if undesirable combustion conditions occur.
  • Page 30 Before You Call For Service… Troubleshooting Tips Save time and money! Review the charts on the following pages first and you may not need to call for service. This water heater incorporates a combustion shut off device that shuts the operation of the water heater down if undesirable combustion conditions occur.
  • Page 31: Gas Valve Led Codes

    Gas Valve LED Codes LCD CODE GAS VALVE LED STATUS/PROBLEM For Optional Display Short flash once IDLE (no call for heat, None every four seconds no fault conditions) “Heartbeat”, alter- Call For Heat (no fault None nates bright/dim conditions) Low flame signal (con- One Flash, three trol continues to oper- second pause...
  • Page 32: Parts List

    Replacement Parts. For 40 and 50 gallon models using natural or LP gas. Instructions For Placing a Parts Order All parts orders should include: Rubber Coupling Blower Assembly ** Heat Trap Nipple Anode rod Flammable Vapor Sensor *Burner Access Door Gasket *Burner orifice The model and serial number of the water heater from the rating plate.
  • Page 33 Notes: This page intentionally left blank.
  • Page 34: If You Need Service

    IF YOU NEED SERVICE 1. Should you have any questions about your new water heater, or if it requires adjustment, repair, or routine maintenance, it is suggested that you first contact your installer, plumbing contractor or previously agreed upon service agency. In the event the firm has moved, or is unavailable, refer to the telephone directory, commercial listings or local utility for qualified service assistance.
  • Page 35 ✁ Cut here Please place in envelope and mail to: Rheem Manufacturing Company Warranty Registration Department P .O. Box 34070 Louisville, KY 40232-4070...
  • Page 36 Consumer Product Ownership Registration Follow these three steps to protect your new appliance investment: Complete and mail this Consumer Product Ownership Registration today. Model Number Consumer Product Ownership Registration Water Heater Mrs. Miss ■ ■ ■ ■ First Name Last Name Street Address...

Table of Contents