Numark CDN-34S Operating Manual page 10

CDN-34S
DESCRIPTION OF THE PLAY/PAUSE AND CUE OPERATIONS
STARTING PLAY OPTIONS
Play can be started any 1 of 3 ways
1. Pressing the "PLAY/PAUSE" button
2. Pressing the "STUTTER" button as explained in the STUTTER SECTION
3. When the cue button is pressed a second time, it will temporarily play a section and will stop it when the button
is released. (to check a cue point)
PLAY and CUE
Pressing the "PLAY/PAUSE" button starts the disc. Pressing the "CUE" button will reset the disc to the last place where
the disc was started. This is called the cue point. By alternately pressing the "PLAY/PAUSE" button and the "CUE"
button, the disc may be returned and played from the cue point any number of times. This function is called back cue.
PLAY, PAUSE and CUE
EDITING CUE POINT
When the inner search dial is turned while a
cue point is set, a new cue point can be
located. The CD player will repeatedly play
small parts of the CD as you move it to the
desired position. By pressing "PLAY/PAUSE"
then "CUE" you can confirm that this new cue
point is desirable
Note: If the "LOOP IN" button is depressed during play for any reason as explained in LOOPING and STUTTERING, a
new cue point will be set on the fly.
©1999 Numark Industries
- The Leader in DJ Technology
- 10 -
http://www.numark.com