Resetting Only Handset - Panasonic KX-PRX120W Service Manual

8.4.2.

Resetting only handset

The only handset is reset by doing the following steps
1
Install the charged batteries into the handset.
2
Press "*#72627664*#" to enter Factyory Mode.
3
Factory Reset --> Factory reset2.
4
Keep pressing Power Button at language select screen and select shutdown.
5
Keep pressing the power key and home key at the same time until "Android system recovery" is displayed.
(about 10 seconds)
6
Move the focus to "wipe data/factory reset" by Volume button and push the power key.
7
Move the focus to "Yes -- delete all user data" by Volume button and push the power key (*2).
8
Remove the battery after the "Data wipe complete."
Note: (*2)
• The handset registration to the base unit is cancelled.
• If the handset needs to be registered to the base unit, refer to Registering a Handset to a Base Unit in the Operating
Instructions.
• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.
to .
8
Handset
21
KX-PRX120W/KX-PRXA10W