Configuration Guide - Grandstream Networks HT801 Administration Manual

HT801/HT802 LEDs Pattern
There are 3 LED buttons on HT801 and 4 LED buttons on HT802 that help you manage the status of your Handy Tone.
LED Lights Status
The Power LED lights up when the HT801/HT802 is powered on, and it flashes when the HT802 is
Power LED
booting up
Internet
The Ethernet LED lights up when the HT801/HT802 is connected to your network through the Ethernet
port, and it flashes when there is data being sent or received.
LED
Phone LED for
HT801 The phone LEDs
1 & 2 indicate the status of the respective FXS port-phone on the back panel OFF – Unregistered ON
(Solid Blue) – Registered and Available Blinking every second – Off-Hook / Busy Slow blinking – FXS
LEDs indicate
Phone LED 1&2 voicemail
for HT802

CONFIGURATION GUIDE

The HT801/HT802 can be configured in one of two ways:
The IVR voice prompt menu.
The Web GUI is embedded on the HT801/HT802 using the PC's web browser.
Obtain HT801/HT802 IP Address via Connected Analogue Phone
Figure 5: Connecting the HT801/HT802
Figure 6 : HT801/HT802 LEDs Pattern
Table 4: HT801/HT802 LEDs Pattern Description