Chapter 1 Installing Srem; Srem Installation Precautions - Nortel SREM User Manual

Chapter 1
Installing SREM
The Security & Router Element Manager (SREM) is a graphical user
interface that allows users to configure and monitor a variety of devices,
including the Nortel Secure Network Access Switch 4050 (Nortel SNAS
4050) and the Nortel Secure Router 6200 Series.
SREM runs in an online, interactive mode, and allows the management of
multiple devices from a single application.
This chapter includes the following topics:
Topic
"SREM installation precautions" (page 15)
"System requirements" (page 16)
"Removing previous versions of SREM" (page 16)
"Installing SREM on your system" (page 21)
•
•
•
•

SREM installation precautions

The following warnings apply to SREM on all operating environments:
•
•
Installing and Using Security and Routing Element Manager (SREM)
Copyright © 2007, Nortel Networks
.
"SREM installation precautions" (page 15)
"System requirements" (page 16)
"Removing previous versions of SREM" (page 16)
"Installing SREM on your system" (page 21)
If you have other Nortel devices in your network, and are running earlier
versions of SREM software, you must install the newest version of
SREM in order to access the switches running the latest software.
To maintain multiple versions of SREM on your system, choose a
different installation folder for each new version of SREM.
Nortel Secure Network Access Switch Software Release 1.6.1
NN47230-301 02.01 Standard
1.6.1 16 July 2007
15