Setting Pri Channels Using Annex Manager - Bay Networks 6300 Quick Start Manual

Quick start for unix

Hide thumbs Also See for 6300:

Table of Contents

Enlarged version

Modify the following parameters in the external CSU

through its front panel:

FORMAT (FDL) = ANSI (or ATT)

CLOCK = SLAVE

DISTANCE = 133 ft.

Use na to enable SNMP sets, modify the PRI parameter

switch_type if it is other than 5ess (NI-2 or DMS100, for

example) and specify the distance between the Annex and

the CSU.

% na

command: annex 129.9.200.62

command: set annex allow_snmp_sets y

command: set pri switch_type dms

command: set pri dsx1_line_length 101-135

command: boot

command: quit

Setting PRI Channels Using Annex Manager

To conﬁgure Remote Annex Ports using Annex Manager:

Start Annex Manager:

gui_am

Enter the name of the Annex or its IP address and click on

Setup...

Fill out the items in the window and click on

Repeat Step 3 for screen in the Setup Option Menu in the

upper right corner of the window.

Remote Annex Quick Start for UNIX

166-024-857

Rev. A

Apply

Table of Contents

Table of Contents