Bay Networks 6300 Quick Start Manual page 31

Remote Annex 2000
Remote Annex 4000
Remote Annex 5390
Remote Annex 5391
Remote Annex 6100
Remote Annex 6300
Remote Annex 5393
All Annexes
1. Enter addr and answer the prompts as shown in the
example. To accept the default shown in brackets, press the
key.
Return
monitor:: addr
Enter Internet address [<invalid or uninitialized>]::
192.9.200.62
Enter Subnet mask [255.255.255.0]::
Enter preferred load host Internet address [<any
host>]:: 192.9.200.55
Preferred load host address: 192.9.200.55
Enter Broadcast address [0.0.0.0]::
Preferred dump address [0.0.0.0]::
Select type of IP packet encapsulation (ieee802/
ethernet) [<ethernet>]::
Type of IP packet encapsulation: <ethernet>
monitor::
Load Broadcast y/n [y]::
1. Enter addr and answer the prompts as shown in the
example. To accept the default shown in brackets, press the
key.
Return
monitor:: addr
Enter Internet address (hex) <uninitialized>::
192.9.200.62
Enter Subnet mask [255.0.0.0]::
Enter Broadcast address [0.0.0.0]::
Enter Preferred Load Host address [<any host>]::
192.9.200.55
Enter Preferred Dump Host address [0.0.0.0]::
Enter Preferred Load/Dump Gateway address
<uninitialized>::
Select type of IP packet encapsulation (ieee802/
ethernet) [<ethernet>]::
Load Broadcast y/n [y]::
2. If you have purchased a LAT key, enter the software key
provided by Bay Networks.
monitor:: lat
Enter LAT KEY: [<uninitialized>]::
Remote Annex Quick Start for UNIX
166-024-857 Rev. A
7