Bay Networks 5393 User Manual page 51
Release 5.1 supplement for remote annexes
Hide thumbs
Also See for 5393:
- Hardware installation manual (141 pages) ,
- Manual (351 pages) ,
- Installation manual (114 pages)
Table of Contents
Advertisement
Tunnel Reject
The Remote Annex creates a log entry whenever it rejects L2TP tunnel
establishment with a peer. When an L2TP tunnel is rejected, the log
contain Acct-Status-Type (40) = Tunnel-Reject [VSE Bay Networks
10]. The Remote Annex also includes the following attributes, when
applicable, in this log:
•
NAS-IP-Address (4)
•
Acct-Delay-Time (41)
•
Annex-Tunnel-Type (VSA Bay Networks 36)
•
Annex-Tunnel-Medium-Type (VSA Bay Networks 37)
•
Annex-Tunnel-Client-Endpoint (VSA Bay Networks 38)
•
Annex-Tunnel-Server-Endpoint (VSA Bay Networks 39)
•
Annex-Tunnel-Id (VSA Bay Networks 40)
MP Start
The Remote Annex creates a log entry whenever an MP bundle is created.
For MMP, this will be logged only on the LNS. In this case, Acct-Status-
Type (40) = MP-Start [VSE Bay Networks 13]. The Remote Annex
also includes the following attributes, when applicable, in this log:
•
NAS-IP-Address (4)
•
NAS-Port (5) = MP [6000] + index
•
Acct-Delay-Time (41)
•
Acct-Multi-Session-Id (51)
•
NAS-Port-Type (61) = Virtual [5]
Release 5.1 Supplement for Remote Annexes
119346-A Rev. A
33
Advertisement
Table of Contents
