Bay Networks 5393 User Manual page 49

IPXCP Start
The Remote Annex creates a log entry whenever a PPP session starts
IPXCP. The log contains the negotiated IPX address. In this case, Acct-
Status-Type (40) = IPXCP-Start [VSE Bay Networks 4]. The Remote
Annex also includes the following attributes, when applicable, in this log:
• NAS-IP-Address (4)
• NAS-Port (5)
• Framed-IPX-Network (23)
• Class (25)
• Acct-Delay-Time (41)
• Acct-Session-Id (44)
• Acct-Multi-Session-Id (50)
• NAS-Port-Type (61)
ATCP Start
The Remote Annex creates a log entry whenever a PPP session starts
ATCP. In this case, Acct-Status-Type (40) = ATCP-Start [VSE Bay
Networks 5]. The Remote Annex also includes the following attributes,
when applicable, in this log:
• NAS-IP-Address (4)
• NAS-Port (5)
• Class (25)
• Acct-Delay-Time (41)
• Acct-Session-Id (44)
• Acct-Multi-Session-Id (50)
• NAS-Port-Type (61)
Release 5.1 Supplement for Remote Annexes
119346-A Rev. A
31