Bay Networks 5393 User Manual page 48

Release 5.1 Supplement for Remote Annexes
119346-A Rev. A
30
Call Stop
The Remote Annex creates a log entry whenever it detects an end to a
call. In this case, Acct-Status-Type (40) = Call-Stop [5]. The Remote
Annex also includes the following attributes, when applicable, in this log:
• NAS-IP-Address (4)
• NAS-Port (5)
• Class (25)
• Called-Station-Id (30)
• Calling-Station-Id (31)
• Acct-Delay-Time (41)
• NAS-Port-Type (61)
IPCP Start
The Remote Annex creates a log entry whenever a PPP session starts
IPCP. The log contains the negotiated IP address. In this case, Acct-
Status-Type (40) = IPCP-Start [VSE Bay Networks 3]. The Remote
Annex also includes the following attributes, when applicable, in this log:
• NAS-IP-Address (4)
• NAS-Port (5)
• Service-Type (6)
• Framed-Protocol (7)
• Framed-IP-Address (8)
• Class (25)
• Acct-Delay-Time (41)
• Acct-Session-Id (44)
• Acct-Multi-Session-Id (50)
• NAS-Port-Type (61)
• Annex-Local-IP-Address (VSA Bay Networks 35)