Playing Ipod Player - Philips WAC3500 User Manual

10. External sources
6
Press REC 0 to start recording
➜
The display shows transferring ...The number
of tracks transferred/to be transferred
appears
➜
Selected tracks are transferred to the USB
device.
7
Press STOPÇ to stop recording
Helpful hints:
Recording will also stop when:
– the USB device is unplugged and the display
shows Connection interrupt, Cancel transfer...
– the display shows Device is full, Cancel transfer-
ring...
To find the transferred tracks on your
USB device
All the transferred tracks are saved under the
Music folder.They are named as XX-YY.mp3
(where XX denotes track number and YY
denotes track name) and are located under
folders and sub-folders in the same way as they
are located under the genre, artist and album in
the Center's hard disk.
To play the transferred tracks on other
music players
You can play the transferred tracks on music
players supporting USB playback. On different
players, the files/folders may be browsed in dif-
ferent ways.
Helpful hint:
– DRM protected files might not play if they are
transferred to the USB device.
46

10.2 Playing iPod player

You can enjoy the music library on your iPod
via WAC3500's sophisticated speaker system.
1
Check that your iPod player is properly con-
nected to the Center (see 3.1.3 Installation:
Connecting the iPod dock)
2
Check that the Center is switched on or is
already in standby mode (see 5.Basic func-
tions)
3
Press HOME to enter the homepage and use
the navigation controls 3 or 4 and 2 to select
Portable > iPod.
4
iPod player:
a. turn down the volume to avoid noise distor-
tion
b. press the PLAY key to start playback
5
To adjust the volume, press VOL+/- or use the
sound controls on your iPod