Figure 85 Advanced Settings - Nortel Configuration Manager Configuration

Figure 85 Advanced Settings

7
8
Configure the Advanced parameters for Server 1 and click Next. Do the same
for Servers 2 and 3 in the panels, clicking Next after configuring each server.
Note: If you choose to configure a server, ALL fields must be filled out.
All unconfigured fields will be deleted.
Enter the report parameters and click Finish.
Note: Data changes from this wizard will remain local to CCM and all
data collected through the wizard will be applied to the local CCM
database only. You must export the devices after running this wizard for
the changes to take effect on the network.
Chapter 8 Using CCM Wizards 141
Contivity Configuration Manager 2.2 User Guide