Traffic Generators - Nortel 3050 Troubleshooting Manual

Table 3
Log file types in a log dump
Log file
type
clierror
erlerror
erlstart
conslog
dmesg
ssl.log
ikelog
message
Procomm

Traffic Generators

Use the traffic dump commands to display either the SSL or TCP traffic
capture tools in the system.
Table 4 "Interpreting an SSL traffic dump" (page
on SSL dump entry and its description.
Table 4
Interpreting an SSL traffic dump
Dump entry
New TCP connection #<connection number>:
<sending host IP> (<port number>) <->
<receiving host IP>(<port number>)
<connection number> <start timestamp>
(<previous record timestamp>) S>C <record
type> FIN
Copyright © 2007 Nortel Networks
.
Description
This log provides information on the CLI engine and is used by
engineering to debug issues while in development.
This log provides information on the internal Erlang language
engine and SSL acceleration. It is used by Engineers to debug
issues while in development.
This log provides information on the internal Erstart language
engine and SSL acceleration. It is used by Engineers to debug
issues while in development.
This log contains messages displayed on the console port of the
device. These messages are the one that are generated during
boot sequence. These messages are generated during boot
sequence.
This log contains messages generated by the kernel.
This log contains messages generated by the simpleproxy
features. The user needs to completely logoff and then close the
browser ; login and then active the ssldump.
IPsec module related messages.
This log contains standard syslog types of messages and
contains general information such as system-level status and
non-application acceleration errors across the device.
Kernel panic message with debug information can be captured
from console directly. Use Procomm to capture those messages.
Description
A new TCP connection <number> made
between the sending host using port <number>
to the receiving host using port <number>.
The timestamp when the connection occurred
and the elapsed time since the last connection.
The connection is from server to client (S>C) or
client to server (C>S) and is a record type.
Nortel VPN Gateway
Troubleshooting Guide
NN46120-700 01.01 Standard
12 October 2007
Traffic Generators 11
11)provides information