Site Preparation - Nortel Nautica 4000 Installation Manual

Nautica 4000 Installation Guide

Site Preparation

119500-A Rev. A
You should install the Nautica 4000 on a flat surface, in a clean,
dry location with no extreme temperatures. Make sure that all of
the required services (power, LAN access and ISDN) are
available and working correctly.
Table 1 lists the operating requirements for correct installation of
the Nautica 4000.
Table 1.
Parameter
Power supply
Power supply current
Power consumption
Operating temperature
Humidity
LAN cable
Make sure that there is sufficient space on all sides of the Nautica
4000 so that it does not exceed the maximum temperature.
Operating Requirements
Specification
85 to 264 VAC, 47 to 440 Hz
350 mA maximum @ 230 VAC
730 mA maximum @ 110 VAC
80 W maximum
o
5 to 30
5% to 95% (noncondensing)
100 m maximum Cat 3 or 5
3
o o o
C (41 to 86 F)