Brewing Coffee Later (Delay Brew) - Mr. Coffee JPX37-R Series User Manual

3. After brewing is complete an audible ready signal will
sound to let you know your coffee is ready.
4. After the used coffee grounds have cooled, carefully
remove the filter basket and discard them.
NOTE: The brew basket lid is hot after brewing. Always allow
the coffeemaker to cool down before cleaning.
5. Prior to making a second pot of coffee, turn the
coffeemaker off. This will reset the FRESH BREW™ TIMER
feature. To turn the coffeemaker off, press the Brew
Now/Off button all lights will turn off.
6. Make sure the decanter is empty before starting to brew
coffee.
7. Be sure to turn your coffeemaker off when no longer
using it.
The Fresh Brew™ Timer Feature
The FRESH BREW™ TIMER feature lets you
know how long your coffee has been
waiting for you. At the start of the brew
cycle, the FRESH BREW™ TIMER feature will
automatically be activated.
Press the FRESH BREW™ TIMER button
once (Figure 8) and the clock time will
change to show the amount of time that
has passed since brewing completed. Push
again to display current time.
NOTE: The Brew Now button must be lit for the Fresh Brew
feature to operate. The time and delay brew time cannot be
set when the fresh brew time is displayed.
16
BREWING COFFEE LATER
1. You must first set the time for when
you would like the coffeemaker
to begin brewing your coffee as
described in Setting the Clock and
the Delay Brew Timer section.
2. Prepare your coffeemaker as
described in Adding Water and
Ground Coffee section.
3. To activate DELAY BREW and program
your coffeemaker to brew coffee at a later time, press
the Delay Brew button once (Figure 9). The yellow DELAY
BREW light will turn on. The coffeemaker is now set to
automatically brew coffee at the pre-set later time. You
can select a stronger strength if you desire by pressing
the Strong Brew button. Otherwise, it will default to
regular strength.
4. At the pre-set time, the Brew Now/Off light will pulse
and the DELAY BREW yellow light will turn off, indicating
the brewing has started in the selected Strong Brew. The
FRESH BREW™ TIMER feature will start.
5. The coffeemaker warmer plate will keep your coffee hot
for 2 hours and then automatically turn off.
Figure 8
As a safety feature, your coffeemaker will NOT start
again automatically the next day. If you want your
TM
coffee to brew at the same time the following day,
simply add a new filter, coffee and water and set
DELAY BREW, by repeating Steps 2 and 3 above.
To cancel DELAY BREW: Press the Delay Brew button once.
The light will turn off (Figure 9).
Figure 9
17