Brewing Coffee Later (Delay Brew) - Mr. Coffee FT series User Manual

4.Prior tomaking asecond potofcoffee, turn the
coffeemaker off. T his w ill r eset the FRESH BREW
TM
TIMERfeature. To turn the coffeemaker off, press
the SELECTbutton until all lights turn off.
5. Make sure the decanter is empty before starting
to brew coffee.
6. Be sure to turn your coffeemaker off when
no longer using it.
The Fresh Brew
TM
Timer Feature
The FRESHBREW
TM
TIMER feature lets you know how
long your coffee has been waiting for you. At the
start of the brew cycle, the FRESHBREW"TIMER
feature will automatically be activated and the clock
display will change to show the time since brewing
began. Incremental segments of the FRESHBREW
TM
TIMERfeature will start to darken as an indication of
how long the coffee has been waiting for you.
Press the FRESHBREW
TM
TIMER button once (Figure 8)
to go back to the clock function (while on the
clock mode, the FRESHBREW
TM
TIMERfeature will
keep counting). The display will automatically
change back to the clock after 2 hours or when the
unit is turned off.
NOTE: The BREWNOW green light must be on
for the FRESHBREW
TM
TIMERfeature to operate.
The time and delay brew time cannot be set
when the flesh brew time is displayed.
On/Off Audible Ready Signal
The coffeemaker will beep three times at the end of
the brew or clean cycle. You may choose not to be
alerted by turning the audible ready signal off (Figure 9).
FIGURE 8
FIGURE 9
BREWING COFFEE LATER
1. You must first set the time for when you would
like the coffeemaker to begin brewing your
coffee as described in Setting the Clock and
the Delay Brew Timer section.
2. Prepare your coffeemaker as described in
Adding Water and Ground Coffee section.
3,
To activate DELAY BREW and program your
coffeemaker to brew coffee at a later time, press
the SELECT button twice (Figure 10). The yellow
DELAY BREWlight will turn on. The coffeemaker is
now set to automatically brew coffee at the
pre-set later time. At this time the brew strength
light will turn on. You can select the strength that
you desire by pressing the BREWSTRENGTHbutton.
4. At the pre-set time, the green BREWNOW light
will turn on and the DELAY BREW yellow light will
turn off, indicating the brewing has started in the
selected brew strength. The FRESHBREW
TM
TIMER
feature will start.
5. The coffeemaker warmer plate will keep your coffee
hot for 2 hours and then automatically turn off. Thermal
models will turn off at me end of me brew cycle.
As a safety feature, your coffeemaker will NOT
start again automatically the next day. If you
want your coffee to brew at the same time the
following day, simply add a new filter, coffee
and water and set DELAY BREW, by repeating
Steps 2 and 3 above.
To cancel DELAY BREW:
Press the SELECTbutton until all lights turn off
(Figure 10).
FIGURE 10