Advertisement
T24 KIM initialization
KIM indicators turn on and flash during the first ten seconds
after powering up. It can take up to five minutes for the KIM
to initialize.
The default setting for the programmable memory buttons
on the KIM is blank. The side illustration shows the button
number assignment on a KIM.
Troubleshooting Tip: An Addon Error message appears
on the T7316E telephone display and an error tone is
generated when there is a connector problem with a KIM.
Check that the KIM cord is properly inserted into the
accessory connector port of the T7316E telephone.
T24 KIM coldstarts
Internal autodial numbers can be automatically assigned to the programmable memory buttons on the
KIM when a coldstart is performed. Internal autodial numbers are assigned in ascending order starting
on the top left button (button 01) on the KIM. A coldstart must be performed during the first ten seconds
after powering up a KIM.
To coldstart an individual KIM
1
Unplug the T7316E telephone line cord, then
reconnect it to power up.
2
While the indicators are
flashing on the individual
KIM, simultaneously press
the top two and the bottom
two buttons on the lower
button set of the KIM, as
shown in the illustration
(buttons: 05, 12, 17 and 24).
3
At the beginning of the coldstart, indicators beside
each KIM button will briefly flash starting at the
bottom right button (button 24).
4
When the KIM coldstart is completed, the T7316E
telephone display automatically returns to the time
and date.
2
KIM button number assignment
To coldstart all KIMs
1
Unplug the T7316E telephone line cord, then
reconnect it to power up.
2
While the indicators are
flashing on the first KIM
(next to the telephone),
simultaneously press the
top two buttons and the
bottom two buttons on the
KIM, as shown in the
illustration.
(buttons: 01, 12, 13 and 24)
3
At the beginning of the coldstart, indicators beside
each KIM button will briefly flash starting at the
bottom right button (button 24).
4
When the KIM coldstart is completed, the T7316E
telephone display automatically returns to the time
and date.
B01
B13
B02
B14
B03
B15
B04
B16
B05
B17
B06
B18
B07
B19
B08
B20
B09
B21
B22
B10
B11
B23
B12
B24
1-800-4 NORTEL
www.nortel.com
P0603481_02
Printed in Canada
Advertisement
