Set Up Push-To-Talk - Nortel 2211 User Manual

User Option menu
Up

Set up Push-to-Talk

Push-to-Talk mode enables two-way radio communication with another handset user.
You configure push-to-talk using the following:
• Channel — selects the channel to be used.
• Enable/Disable — enable or disable Push-to-Talk.
• Audio Volume — set the audio volume when using Push-to-Talk.
• Tone Volume — set the volume of the tone played for Push-to-Talk.
To set up a Push-to-Talk channel:
Push-to-Talk
Channel
60
• Press the Up
previous menu and choose another
option.
• Press the Power Off/End Call
to exit all menus and return to the
standby state.
Note: You can also press the
key from the top-level menu to exit and
return to the active (off-hook) state.
1. Press and hold the
in standby mode.
2. Use the Up and
through the menu and highlight
Push-to-Talk.
3. Press the Select
key) to select the option. The next menu
level displays.
4. Use the Up and
through the menu and highlight
Channel.
5. Press the Select
key) to select the option.
6. If enabled, select a channel (1 to 8).
soft key to return to the
Exit soft
Function key when
Down buttons to scroll
button (or the OK
Down buttons to scroll
button (or the OK
key
soft
soft