Table of Contents
Advertisement
•
•
Clickable link in TunnelGuard agent
The TunnelGuard agent presents an error message on desktop PCs whenever an
SRS rule fails. This error message is comprised of an SRS rule and an SRS
comment. The SRS comment has clickable links that provide rule-specific
locations to download information for compliance in cases where the user fails to
comply. Any text that begins with http:// or https:// automatically transforms to a
clickable link.
Recovery from initial check failure
Initial Failure Recovery Mode overcomes many situations that make you stay in
restricted mode of tunnel for long durations. If the TunnelGuard agent detects
SRS FAILURE/UPDATE on the first check, it goes into Failure Recovery
Mode. This mode enables a faster, more frequent SRS compliance checking by
the TunnelGuard agent. The TunnelGuard agent does not engage the SNAS until
there is a change in compliance. Once the system falls into compliance, or the
Failure Recovery Mode interval expires, TunnelGuard comes out of Failure
Recovery Mode. The default failure recovery interval is 10 seconds and is
configured using TunnelGuard properties. The duration of Failure Recovery
Mode is the length of the first intra-interval checking.
Nortel Secure Network Access Switch 4050 Configuration – Using TunnelGuard System Agent
Install TunnelGuard with Installer property DisablePopup set to 1. This
ensures no pop-up messages are generated on the desktop PC, even when
Desktop Monitor is installed. This feature works on registry settings on
desktop PCs, so you can modify the registry settings to change the behavior.
Install TunnelGuard with Installer property HideTaskbarIcon set to 1. This
ensures no pop-up messages are generated and no taskbar icon appears in the
system tray, even when Desktop Monitor is installed and running on the
system. This feature works on registry settings on desktop PCs, so you can
modify the registry settings to change the behavior.
Chapter 1 TunnelGuard 25
Advertisement
Table of Contents
