Chapter 2: System Overview; Front View Of The System - Dell VxRail E660 Installation And Service Manual

VxRail E660 and E660F are a 1U server that supports:
rd
● Up to two 3 Generation Intel Xeon Scalable processors, with up to 40 cores per processor
● 32 DIMM slots
● Two fault tolerant redundant (FTR) AC power supply units
● Up to 10 x 2.5-inch drives (with two universal slots to support optional NVMe drives)
VxRail E660F supports DPU/SmartNIC.
VxRail E660N is a 1U server that supports:
rd
● Up to two 3 Generation Intel Xeon Scalable processors, with up to 40 cores per processor
● 32 DIMM slots
● Two FTR AC power supply units
● Up to 10 x 2.5-inch all NVMe drives
You cannot mix different capacity drives in VxRail E660N.
NOTE: All instances of SAS, SATA, NVMe drives are referred to as drives in this document, unless specified otherwise.
For more information about supported drives, see the Dell VxRail™ E660, E660F, and E660N Technical Specifications.

Front view of the system

The following figure shows the front view of the VxRail E660, E660F, and E660N 10 x 2.5-inch drive system:
Item Ports, panels, and
slots
1 Left control panel
2 Drive (10)
Icon Description
N/A
Contains the system health, system ID, status LED, and the iDRAC Quick
Sync 2 (wireless) indicator.
NOTE: The iDRAC Quick Sync 2 indicator is an optional feature.
● Status LED: Enables you to identify any failed hardware components.
There are up to five status LEDs and an overall system health LED
(Chassis health and system ID) bar. For more information, see
indicators
● Quick Sync 2 (wireless): Indicates a Quick Sync enabled system. The
Quick Sync feature is optional. This feature allows management of the
system by using mobile devices called as OpenManage Mobile (OMM)
feature. Using iDRAC Quick Sync 2 with OMM aggregates hardware
or firmware inventory and various system level diagnostic and error
information that can be used in troubleshooting the system. For more
information, see the Dell VxRail™ E660, E660F, and E660N Technical
Specifications.
N/A Enables you to install drives that are supported on your system.
System overview
section.
2
Status LED
System overview 7