Connection Manager; Tv Configuration - Nokia N93i User Manual

been added, updated, deleted, or discarded (not
synchronized) in your device or on the server.

Connection manager

Press , and select
status of data connections or end connections in GSM and
UMTS network and wireless LAN, select
To search for wireless LANs available within range, select
Availab. WLAN.
Data connections
In the active connections view, you can see the open data
connections: data calls (
( ), and wireless LAN connections (
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To end a connection, select
close all open connections, select
all.
To view the details of a connection, select
Details. The details shown depend on the connection type.
84 Copyright © 2007 Nokia. All rights reserved.
Connect. > Conn. mgr.. To view the
Act. data
), packet data connections
).
Options > Disconnect. To
Options > Disconnect
Options
Wireless LAN
The available wireless LAN view shows a list of wireless
LANs within range, their network mode
Ad-hoc), and signal strength indicator.
networks with encryption, and
active connection in the network.
To view the details of a network, select
Create an IAP
conn..
1 Press , and select
Availab. WLAN.
2 The device searches for wireless LANs within range.
Scroll to the network in which you want to create an
IAP, and select
3 The device creates an IAP with default settings. To view
or change these settings, see
105.

TV configuration

Press , and select
following:
TV system — Select
format or NTSC for NTSC TV system format.
>
Ratio — Select 4:3
(Infrastructure
is shown for
if your device has an
Options
Connect. > Conn. mgr.
Options > Define access point.
"Access points", on page
Connect. > TV out. Select from the
PAL for PAL and SECAM TV system
or 16:9.
or
> Details.
>