Nokia N93i User Manual page 103

To scan a code, select Scan
red lines on the display. The
decode the code, and the decoded information is displayed.
To save the scanned data, select
is saved in .bcr format.
To view previously saved, decoded information in the main
view, select Saved data. To open a code, press
When viewing the decoded information, the different links,
URL links, phone numbers, and e-mail addresses are
indicated by icons on the top of the display in the direction
they appear in the decoded information.
After scanning the code, select
following:
Scan new code — to scan a new code
code. Set the code between the
Barcode attempts to scan and
Options > Save. The data
.
Options and from the
Open link — to open a URL link
Add to bookmarks — to save a URL link to the bookmarks
in Web
Create message — to send a text message or an e-mail to
a compatible device
Add to Contacts — to add a phone number, e-mail
address, or URL address to
Call — to call a phone number
The available options may vary depending on the
highlighted link.
The device reverts to the standby mode to save battery
power if Barcode cannot be activated or if no keys are
pressed for 1 minute. To continue scanning or viewing
saved information, press
Copyright © 2007 Nokia. All rights reserved.
Contacts
.
93