Nokia N93i User Manual page 90

Settings
Press , and select
open the application for the first time, you are asked to
define a name for your device. After you set Bluetooth
connectivity on and change
Shown to all, your device and this name can be seen by
other users with devices using Bluetooth technology.
Select from the following:
Bluetooth — Select
another compatible device, first set Bluetooth
connectivity On, then establish a connection.
My phone's visibility
by other devices with Bluetooth technology, select
to all. To hide it from other devices, select Hidden.
My phone's name
Remote SIM mode
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select On.
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. Before
the mode can be activated, the two devices must be
paired and the pairing initiated from the other device.
80 Copyright © 2007 Nokia. All rights reserved.
Connect. > Bluetooth. When you
My phone's visibility
On or Off. To connect wirelessly to
— To allow your device to be found
— Edit the name of your device.
— To enable another device, such as a
When pairing, use a 16-digit passcode, and set the other
device as authorized. See
Activate the remote SIM mode from the other device.
When the remote SIM mode is on in your Nokia device,
Remote SIM is displayed in the standby mode. The
to
connection to the wireless network is turned off, as
indicated by
you cannot use SIM card services or features requiring
cellular network coverage. However, a wireless LAN
connection remains active during the remote SIM mode.
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls, except to the emergency numbers
Shown
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the lock code to
unlock it first.
To exit the remote SIM mode, press
rem. SIM mode.
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth > Off
way, you can better control who can find your device with
Bluetooth wireless technology, and connect to it.
"Pair devices", on page 81.
in the signal strength indicator area, and
, and select
or My phone's visibility > Hidden. In this
Exit