Checking The Power Tool; Testing The Controls - Stihl FS 361 C-M Owner's Instruction Manual

13 Checking the Power Tool

To shut off the engine:
1
► Release the throttle trigger (1) and throttle trigger
lockout (2).
► Depress the stop switch (3).
The engine stops.
The cutting attachment will continue to move for a short time
after the throttle trigger is released. Take care to avoid
contact after releasing the throttle trigger and when setting
down the trimmer / brushcutter.
Depress the stop switch to shut off the engine. After the stop
switch is used to stop the engine, it automatically springs
back and the ignition system returns to the run position. If
the engine is warm, it may be possible to start it by simply
pulling the starter rope with no further adjustments.
0458-838-8601-A
3
2
13 Checking the Power Tool

13.1 Testing the Controls

Before starting work, confirm that the throttle trigger (1),
throttle trigger lockout (2) and stop switch (3) are
undamaged and functioning properly.
1
Throttle Trigger (1) , Throttle Trigger Lockout (2) and Stop
Switch (3)
WARNING
To reduce the risk of serious or fatal injuries, keep hands,
feet and other parts of the body away from the cutting
attachment. Do not touch the cutting attachment while the
engine is running. Never touch the moving cutting
attachment with your hand or any part of your body,
@ 5.7.3. Keep bystanders at least 50 ft. (15 m) away while
testing the controls.
To test the controls:
► Shut off the engine, @ 12.1.
► Attempt to depress the throttle trigger.
If the trigger can be depressed without first depressing the
throttle trigger lockout, take the trimmer / brushcutter to an
authorized STIHL servicing dealer to be repaired before
use.
English
3
2
35