Packet Data; Packet Data Configuration; Session Initiation Protocol (Sip) Configuration - Nokia E62 User Manual

S e t t i n g s
To create an access point group, select
the group. In the Conn. switching
Select and edit the access points that belong to this group in the
To add an access point to the selected access point group, select
to add.
To edit an access point in an access point group, select the access point and
To remove an access point in an access point group, select the access point and
To set the order in which access points are used for e-mail data roaming, select an access point group and Change. Select an
access point and Options

Packet data

Select Menu Settings
> >
Your device supports packet data connections, including GPRS in the GSM network. When you are using your device in a GSM
network, it is possible to have multiple data connections active at the same time; access points can share a data connection,
and data connections remain active during voice calls.

Packet data configuration

The packet data settings affect all access points using a packet data connection.
Select from the following settings:
Packet data conn. — Select
•
in a supported network. Select
it.
Access point — Enter the access point name provided by your service provider to use the device as a packet data modem to
•
your computer.
These settings affect all access points for packet data connections.

Session initiation protocol (SIP) configuration

Select Menu Settings
> >
Session initiation protocols (SIP) are used to create, modify, and terminate certain types of communication sessions with one
or more participants (network service). SIP profiles include settings for these sessions. The SIP profile used by default for a
communication session is underlined.
Select Menu Settings
> >
To create a SIP profile, select
Select a SIP profile to edit.
Select the SIP profile you want to use for communication sessions and
To delete a SIP profile, select it, and press the backspace key.
Select Menu Settings
> >
Select from the following settings:
Profile name — Enter a name for the SIP profile.
•
Service profile — Select
•
Default access point — Select the access point to use for the Internet connection.
•
Public user name — Enter the user name received from your service provider.
•
Use compression — Select if compression is used.
•
Registration — Select the registration mode.
•
Use security — Select if security negotiation is used.
•
Proxy server — Enter the proxy server settings for this SIP profile.
•
Registrar server — Enter the registration server settings for this SIP profile.
•
The settings available for editing may vary.
Select Menu Settings
> >
Proxy servers are intermediate servers between a browsing service and its users used by some service providers. These servers
may provide additional security and speed up access to the service.
Select from the following settings:
Proxy server address — Enter the host name or IP address of the proxy server in use.
•
Realm — Enter the proxy server realm.
•
User name and Password
•
Copyright © 2006 Nokia. All Rights Reserved.
Access point groups
field, define whether to show the connection switching process on the display of your device.
Raise priority or Lower
>
Config. Connection Packet
> >
When available to register the device to the packet data network when you switch the device on
When needed to establish a packet data connection only when an application or action requires
Config. Connection SIP
> >
Config. Connection SIP
> >
Options Add new
> >
Config. Connection SIP settings
> >
IETF or Nokia 3GPP.
Config. Connection SIP settings
> >
— Enter your user name and password for the proxy server.
Options New
> >
Access points
Access points
priority.
data.
See "Connection manager," p. 64.
settings.
settings.
Use default profile or Use an existing
Options
Options Add new
> >
Options Add new
> >
31
group. In the Group name
section.
Options Add access point
> >
Options > Edit.
Options > Remove.
profile.
Default profile.
>
or Edit.
or Edit Proxy server.
>
field, enter a name for
and the access point