Bilge Pump, Reboarding The Evojet - Williams EVO JET Owner's Handbook Manual

5
Bilge Pump
The bilge pump operates automatically. It
can also be manually turned on by pressing
the bilge pump button located on the helm
console.
Reboarding the EvoJet
1 Ensure the engine is off and the kill cord is
removed.
2 Lift up the retaining flap and pull out the
ladder from the underside of the transom.
3 Ensure the ladder is fully extended.
4 Climb the ladder to access the bathing
platform.
5 Ensure the ladder is stowed with the
retaining flap folded down before moving
off.
4 3
2
1
2
3
4
1
5
The pump inlet has a mesh which should be
regularly checked for any dirt and debris.
Extendable bathing
ladder
Reverse bucket
Jet pump anodes
Underwater lights
(if fitted)
Tie down point
(at each side of hull)
25