Controls And Instrument Cluster, Fuelling - Williams EVO JET Owner's Handbook Manual

Controls and Instrument Cluster
1
10
1 Multi-function display 1
2 Compass
3 Multi-function display 2 (if fitted)
4 Switch panel
5 Music system (if fitted)
Fuelling
As part of its pre-delivery inspection your
new EvoJet has been fully tested and
drained of fuel. When refuelling use only
Diesel fuel.
•
Ensure ignition is in OFF position.
•
The fuel fill point can be found on the
starboard side of the helm.
•
Re-fuel in a ventilated area.
•
Do not overfill the tank; be careful not to
spill fuel.
•
Tighten fuel cap securely after re-fuelling.
2
4
6
8 7
9
6 Throttle/shift control
7 Ignition switch
8 Kill cord
9 Manual fire suppression control (behind panel)
10 VHF radio handset (if fitted)
•
Open engine hatch and inspect bilges after
re-fuelling.
•
The filler cap has an integral breather.
Do NOT hose around the fuel filler area as
water may enter the fuel tank.
All Yanmar engines are fitted with a
manual fuel primer/pump. This may
require pumping at first use or when
engine has not operated for extended
periods.
3
5
13