Remove the load compartment cover and the
#
partitioning net (
page 102).
/
If necessary, slide head restraint
#
(
page 89).
/
Fit the ISOFIX or i‑Size child restraint system
#
with Top Tether. In doing so, comply with the
child restraint system manufacturer's installa-
tion instructions.
Guide Top Tether belt
#
1
between the two head restraint bars.
Hook Top Tether hook
#
anchorage
Tension Top Tether belt 4. In doing so, com-
#
ply with the child restraint system manufactur-
er's installation instructions.
1
upwards
If necessary, slide head restraint
#
wards (
page 89). Make sure that you do
/
not interfere with the correct routing of Top
Tether belt 4.
4
under head restraint
3
into Top Tether
2
without twisting.
1
down-
Safely transporting children in the vehicle
Securing the child restraint system with the seat
belt
& WARNING Risk of accident if the rear
bench seat, rear seat and seat backrest
are not engaged
The rear bench seat, rear seat and seat back-
rest may fold forwards, even while the vehicle
is in motion.
As a result, the vehicle occupant will be
R
pressed into the seat belt with increased
force. The seat belt will not be able to pro-
tect as intended and could cause addi-
tional injury.
Objects or loads in the boot or load com-
R
partment cannot be restrained by the seat
backrest.
Make sure that the rear bench seat, the
#
rear seat and the seat backrest are
engaged before every trip.
Ensure that the rear seat backrest is engaged. To
do so, pull forcefully on the seat backrest.
67