Table of Contents
Advertisement
Fold tab
3
down.
#
Pull cover ring
1
apart and remove it.
#
Remove cover panel 2.
#
Removing the spare wheel
Remove wheel nuts 5.
#
Remove the spare wheel.
#
Securing the wheel to the spare wheel bracket
Use nuts
5
to secure the faulty wheel to the
#
spare wheel bracket. Specified tightening tor-
que: 20 Nm
2
Position cover panel
again. Make sure that
#
retainer
6
of cover panel
2
recess 7.
Attach cover ring
1
again and close the lock.
#
%
Make sure that the lock does not cover the
reversing camera. If necessary, turn cover
ring
1
slightly.
Vehicles with an emergency spare wheel: observe
the notes on the emergency spare wheel.
Spare wheel bracket with protective tyre cover
Removing the protective tyre cover
Pull protective tyre cover
#
apart and remove it.
engages in
Breakdown assistance 379
1
on the rear side
Advertisement
Table of Contents
