Date And Time; Security - Nokia 6600 User Manual

Access point - The access point name is needed when you want to use your phone
as a packet data modem to your computer. See "Using your phone as a modem" on
page 106.
DATA CALL
Go to Settings→ Connection→
The Data call settings affect all access points using a data call and high speed
data call.
Online time - If there are no actions the data call is dropped automatically after
a time-out period. The options are
or Unlimited.

Date and time

The Date and time
in your phone, as well as change the date and time format and separators.
• Clock type→
See "Clock" on page 88.
• Clock alarm tone
is reached.
• Auto time update
information to your phone (network service). For the
to take effect, the phone needs to be restarted. Check any alarms as these may
be affected by
• GMT offset
• Daylight-saving

Security

PHONE AND SIM
Explanations for the different security codes that may be needed:
• PIN code (4 to 8 digits) - The PIN (Personal Identification Number) code
protects your SIM card against unauthorized use. The PIN code is usually
supplied with the SIM card.
After three consecutive incorrect PIN code entries, the PIN code is blocked.
If the PIN code is blocked, you need to unblock the PIN code before you can
use the SIM card again. See the information about the PUK code.
• PIN2 code (4 to 8 digits) - The PIN2 code, supplied with some SIM cards, is
required to access some functions.
Nokia 6600 User Guide
User
settings allow you to define the date and time used
Analog or Digital
- to change the tone played when the clock alarm time
- to allow the network to update time, date, and time zone
Auto time update.
- to change the time zone for the clock time.
- to set daylight saving time on or off.
Data call.
defined, in which case you enter a time,
- to change the clock shown in standby mode.
71
Auto time update setting
Copyright © 2004 Nokia
Tools