Download Print this page

EAW MKC Series Instructions Manual

Hide thumbs Also See for MKC Series:

Advertisement

Quick Links

MKC Series
U-Bracket Instructions
Original Instructions
These instructions are for defining acceptable MKC U-Bracket installations to a mounting
surface and for installing an MKC or MKC-WP Series Loudspeaker to an MKC Series U-Bracket.
IMPORTANT SAFETY INSTRUCTIONS – READ THIS FIRST
Safety Instructions
Read and heed all warnings and safety instructions in this manual before using this product.
Failure to follow these precautions may result in damage, injury, or death.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Clean only with a dry cloth.
6) Install loudspeaker in accordance with the manufacturer's instructions.
7) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus that produce heat.
8) Only use attachments/accessories specified by the manufacturer.
9) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, does not operate normally, or has been dropped.
10) Use personal protective equipment not limited to gloves, safety goggles, ear protection,
and lifting supports.
Suspension Warnings
WARNING: Suspending anything, especially overhead of people, should be done with extreme
caution. Always engage the services of a certified professional who is qualified to determine
the requirements for and to implement overhead rigging. Only persons with the knowledge
of proper hardware and safe rigging techniques should attempt to suspend loudspeakers
overhead. Failure to follow these precautions may result in damage, injury, or death.
|
1
Tel 800 992 5013 / +1 508 234 6158
www.eaw.com

Advertisement

loading

Summary of Contents for EAW MKC Series

  • Page 1 U-Bracket Instructions Original Instructions These instructions are for defining acceptable MKC U-Bracket installations to a mounting surface and for installing an MKC or MKC-WP Series Loudspeaker to an MKC Series U-Bracket. IMPORTANT SAFETY INSTRUCTIONS – READ THIS FIRST Safety Instructions Read and heed all warnings and safety instructions in this manual before using this product.
  • Page 2 MKC Series U-Bracket Instructions Avertissements de suspension AVERTISSEMENT: Suspendre quoi que ce soit, en particulier les frais généraux de personnes, doit être fait avec une extrême prudence. Toujours engager les services d'un professionnel certifié qui est qualifié pour déterminer les conditions requises et à mettre en œuvre le gréement en tête.
  • Page 3 MKC Series U-Bracket Instructions Inventory your kit Item Description Quantity MKC Series U-Bracket Button Head Screw, M10 X 45mm long Flat Washer Split-lock Washer Rubber Washer, 3mm thick Socket Head Screw, M4 x 30mm long Flat Washer Split-lock Washer **Tools Needed: 3mm & 6mm Allen wrench** Tel 800 992 5013 / +1 508 234 6158 www.eaw.com...
  • Page 4 These values have been confirmed with Finite Element Analysis and destructive testing. b. The weight/mass of each MKC Series U-Bracket is also listed on its appropriately applied label. c. The MKC Series U-Brackets are designed to suspend only one loudspeaker per u-bracket.
  • Page 5 Series U-Bracket must be installed oriented with the slot angled upward as visually shown in Figure 1, opposing the ground. c. Level - The back flange of the MKC Series U-Bracket must be level when installed to the mounting surface for either figure 1 or 2 orientation and before installing an MKC Series Loudspeaker to the U-Bracket.d.
  • Page 6 Locking washer is first on bolt, then flat washer, rubber washer to be inside of U-Bracket flanges ii. The mounting point is always connected to the MKC Series Loudspeaker using the M10 screw location on the top and bottom of the MKC Series Loudspeaker.
  • Page 7 MKC Series U-Bracket mounting point, through the selected rubber washer (E) and into the loudspeaker’s center threaded mounting hole. Repeat for the opposite side. vii. Do to the MKC Series U-bracket’s slotted mounting point “A”, the hardware may be preassembled to the MKC Series Loudspeaker.
  • Page 8 Tighten loose hardware and consider installing hardware locking methods. Replace and discard corroded hardware. f. Inspect hardware mounting the MKC Series loudspeaker to the u-bracket for corrosion or looseness. Tighten loose hardware. Replace and discard corroded hardware. g. For weather protected applications (using MKC-WP Series Loudspeakers), inspect hardware sealants for cracking or gaps in sealant.
  • Page 9 However, feel free to contact us with any further questions or comments for topics not covered. Operating Questions EAW Support & Service Tel 508-234-6158 Tel 800-992-5013 (USA only) E-mail Support@eaw.com Thank you for purchasing EAW products One Main Street Whitinsville, MA 01588 Tel 800 992 5013 / +1 508 234 6158 www.eaw.com...

This manual is also suitable for:

Mkc-wp seriesMkc80Mkc120