EAW MKC Series Instructions Manual

MKC Series & MKD526
Bracket Instructions
Original Instructions
These instructions are for defining acceptable MKC series or MKD526 bracket installations to a
mounting surface and for installing an MKC, MKC-WP, MKD526 or MKD526-WP loudspeaker to a
designated bracket.
IMPORTANT SAFETY INSTRUCTIONS – READ THIS FIRST
Safety Instructions
Read and heed all warnings and safety instructions in this manual before using this product.
Failure to follow these precautions may result in damage, injury, or death.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Clean only with a dry cloth.
6) Install loudspeaker in accordance with the manufacturer's instructions.
7) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus that produce heat.
8) Only use attachments/accessories specified by the manufacturer.
9) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, does not operate normally, or has been dropped.
10) Use personal protective equipment not limited to gloves, safety goggles, ear protection,
and lifting supports.
Suspension Warnings
WARNING: Suspending anything, especially overhead of people, should be done with extreme
caution. Always engage the services of a certified professional who is qualified to determine
the requirements for and to implement overhead rigging. Only persons with the knowledge
of proper hardware and safe rigging techniques should attempt to suspend loudspeakers
overhead. Failure to follow these precautions may result in damage, injury, or death.
| 1
Tel 800 992 5013 / +1 508 234 6158 www.eaw.com