Symbols; Safety Warnings - Festool TSV 60 KEBQ Original Instructions Manual

Contents
1 Symbols..................................................... 23
2 Safety warnings.........................................23
3 Intended use..............................................26
4 Technical data........................................... 27
5 Parts of the device.....................................27
6 Commissioning..........................................28
7 Main unit settings......................................28
8 Scoring unit settings................................. 30
9 Working with the electric power tool........32
10 KickbackStop.............................................33
11 Service and maintenance..........................34
12 Accessories............................................... 35
13 Environment.............................................. 36
14 General information.................................. 36
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear protective gloves when changing
tools!
Wear a dust mask.
Wear protective goggles.
Pull out the mains plug
Disconnecting the mains power cable
Connecting the mains power cable
Direction of rotation of saw and the
saw blade
KickbackStop function
Electro-dynamic run-down brake
STOP
Do not dispose of it with domestic
waste.
Tool contains a chip which stores data.
See section 14.1
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel­
evant regulations in the UK.
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
Handling instruction
Tip or advice
Safety class II
2

Safety warnings

2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Safety instructions for specific circular
saws
Only for AS/NZS: The tool shall always be
-
supplied via residual current device with a
rated residual current of 30 mA or less.
Cutting procedures
DANGER: Keep hands away from cut­
-
ting area and the blade. Keep your second
hand on auxiliary handle, or motor hous­
ing. If both hands are holding the saw, they
cannot be cut by the blade.
Do not reach underneath the workpiece.
-
The guard cannot protect you from the
blade below the workpiece.
- Adjust the cutting depth to the thickness of
the workpiece. Less than a full tooth of the
blade teeth should be visible below the
workpiece.
- Never hold the workpiece in your hands or
across your leg while cutting. Secure the
workpiece to a stable platform. It is impor­
English
23