Symbols; Safety Warnings - Festool IS 330 EB Original Instructions Manual

English
Contents
1 Symbols..................................................... 22
2 Safety warnings.........................................22
3 Intended use..............................................26
4 Technical data........................................... 27
5 Parts of the machine.................................27
6 Transport and storage.............................. 28
7 Settings......................................................28
8 Commissioning..........................................29
9 Operation................................................... 30
10 Accessories............................................... 30
11 Maintenance and care...............................31
12 Environment.............................................. 33
13 Troubleshooting........................................ 34
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating manual and safety
warnings.
Wear a dust mask.
Wear ear protection.
Safety class II
Do not expose to rain!
If the movable supply line is damaged
or cut through, immediately disconnect
the plug from the mains.
Not suitable for wood!
Max. cutting depth and length of the
max.
guide strip
330 mm
400 mm
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
Do not dispose of it with domestic
waste.
Tip or advice
Handling instruction
22
2

Safety warnings

2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Safety instructions for chain saws
General chain saw safety warnings
Keep all parts of the body away from the
-
saw chain when the chain saw is operat­
ing. Before you start the chain saw, make
sure the saw chain is not contacting any­
thing. A moment of inattention while oper­
ating chain saws may cause entanglement
of your clothing or body with the saw chain.
Always hold the chain saw with your right
-
hand on the rear handle and your left hand
on the front handle. Holding the chain saw
with a reversed hand configuration increa­
ses the risk of personal injury and should
never be done.
Hold the chain saw by insulated gripping
-
surfaces only, because the saw chain may
contact hidden wiring or its own cord. Saw
chains contacting a "live" wire may make
exposed metal parts of the chain saw "live"
and could give the operator an electric
shock.
Wear eye protection. Further protective
-
equipment for hearing, head, hands, legs
and feet is recommended. Adequate pro­
tective equipment will reduce personal in­
jury from flying debris or accidental contact
with the saw chain.
- Do not operate a chain saw in a tree, on a
ladder, from a rooftop, or any unstable
support. Operation of a chain saw in this
manner could result in serious personal in­
jury.
Always keep proper footing and operate
-
the chain saw only when standing on fixed,
secure and level surface. Slippery or un­
stable surfaces may cause a loss of bal­
ance or control of the chain saw.
- When cutting a limb that is under tension,
be alert for spring back. When the tension