Axminster PROFESSIONAL AP2920B Original Instructions Manual page 9

5. Line-up the holes to the underside of the cast iron
table with the ones in the trunnions and secure in
place with four button head Hex bolts/washers, (fig
13-14).
Fig 13-14
6. Locate the table insert and place it into the centre
of the table, (fig 15).
Fig 15
7. Find the fence locking assembly and slide it into
position on the fence rail as shown, (fig 16).
8. Loosen the two lift and shift handles on the fence
locking assembly. Line-up the 'T' slot to the base of
the fence and slide it over the mounting plate to the
desired position. Nip-up the lift and shift handles to
secure the fence, (fig 17-18).
Fig 16-17-18
9. Locate the Rise and Full handle wheel, loosen the
two grub screws around the mounting boss. Line
up the grubs crews with the machined flats on the
drive shaft and slide the unit on. Nip-up the screws
to secure in place, (fig 19-20).
Fig 19-20
9
ASSEMBLY
Continues over...