Axminster PROFESSIONAL AP2920B Original Instructions Manual page 8

ASSEMBLY
Attaching Stand to Bandsaw
1. Lay the bandsaw on its back to attached the stand
assembly to bandsaw with the four stand Hex bolts
and washers, (fig 06-07-08).
Fig 06-07-08
2. Lift bandsaw vertical, (fig 09).
THE BANDSAW IS A HEAVY PIECE OF
EQUIPMENT, IT IS ADVISABLE TO GET
ASSISTANCE.
TWO MAN ASSEMBLY REQUIRED.
Fig 09
3. Attach the dust outlet below the table with the
four screws provided, (fig 10).
Fig 10
4. Attach each end of the hose to the table's dust
extraction outlet's using the two ring clips, (fig 11).
Fig 11-12
8