Table of Contents
Advertisement
Important notes on using the jack:
Use only a vehicle-specific jack that has been
R
approved by Mercedes-Benz to raise the vehi-
cle.
The jack is only designed for raising and hold-
R
ing the vehicle for a short time while a wheel
is being changed and not for maintenance
work under the vehicle.
The jack must be placed on a firm, flat and
R
non-slip surface. If necessary, use a large, flat,
load-bearing, non-slip underlay.
The foot of the jack must be positioned verti-
R
cally under the jack support point.
Rules of conduct when the vehicle is raised:
Never place your hands or feet under the vehi-
R
cle.
Never lie under the vehicle.
R
Do not start the vehicle and do not release the
R
electric parking brake.
Do not open or close any doors or the trunk
R
lid.
Using the lug wrench, loosen the wheel bolts
#
on the wheel you wish to change by about one
full turn. Do not unscrew the screws com-
pletely.
Wheels and tires 355
Position of the jack support points
& WARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at the
appropriate jacking point of the vehicle, the
jack could tip with the vehicle raised.
Only position the jack at the appropriate
#
jacking point of the vehicle. The base of
the jack must be positioned vertically
under the jacking point of the vehicle.
Advertisement
Table of Contents
