Unable To Perform 2-Sided Printing - Brother HL-3160CDW Service Manual

4.2.7

Unable to perform 2-sided printing

<User Check>
• Close the back cover completely.
• Close the T1 completely.
• Set the driver setting to 2-sided printing.
• Use A4 or Letter paper specified by the manufacturer.
Step
1
2
3
4
5
6
7
Cause
Eject actuator coming off
Back cover failure
Duplex clutch failure
Duplex unit failure
Eject sensor failure
Paper eject ASSY failure
Main PCB failure
Reattach the eject actuator.
Replace the back cover.
Replace the paper feed unit.
Replace the duplex unit.
Replace the eject sensor PCB.
Replace the paper eject ASSY.
Replace the main PCB.
2-86
Remedy
Confidential