Brother HL-3160CDW Service Manual page 55

Error message
First line
Drum ! Open the Top
Cover. Pull out the
drum unit and
toner cartridge.
Slide the Green tab
on Drum Unit.
Open the Top
Cover. Pull out the
drum unit and
toner cartridge.
Slide the Green tab
on Drum Unit.
Drum Stop Replace the Drum
Unit. Refer to the
instructions in the
carton of the new
drum.
Ignore Data Press Stop[x].
Second line
Electric discharge that may be
caused by dirt on the corona
wire of the drum unit was
detected.
Electrified terminal or GRID
terminal signal detected that the
black drum was not installed
when the machine was turned
ON.
Electrified terminal or GRID
terminal signal detected that the
yellow drum was not installed
when the machine was turned
ON.
Electrified terminal or GRID
terminal signal detected that the
magenta drum was not installed
when the machine was turned
ON.
Electrified terminal or GRID
terminal signal detected that the
cyan drum was not installed
when the machine was turned
ON.
Electric discharge was detected
when the number of the black
drum unit rotations had become
more than twice of the upper
limit.
Electric discharge was detected
when the number of the yellow
drum unit rotations had become
more than twice of the upper
limit.
Electric discharge was detected
when the number of the
magenta drum unit rotations
had become more than twice of
the upper limit.
Electric discharge was detected
when the number of the cyan
drum unit rotations had become
more than twice of the upper
limit.
Detected undecodable data
during printing.
Received undecodable PS data.
Undecodable PS data is
received.
2-36
Description
Error Refer
codes to:
6A00 2-66
620A 2-62
620B 2-62
620C 2-62
620D 2-62
6B01 2-66
6B02 2-66
6B03 2-66
6B04 2-66
--- 4.11.1
Confidential