Device Functions
2.5 Device-Recorder Functions
2.5
Device-Recorder Functions
Start and Stop of Recorders
2.5.1
2.5.1.1
Configuration via User Interface
Parameterization Recorders - Start/Stop
To change the start and stop of recorders settings in the Configure tab, proceed as follows:
•
In the navigation window, select Recording and reporting and click Recorders - Start/Stop
[sc_q100_recording parameters, 1, en_US]
Figure 2-87
•
Configure the respective parameters according to the following table.
Table 2-37
Parameter
Start record option
Start time
Recording status
•
After the parameterization, click Send.
•
In the navigation window, select Finish configuration and click Activation.
Depending on the parameterized Start record option, the Start time field shows the start time of the
recording. After activation, the recording starts automatically at the specified time. If the Start immediately
option is selected, the recording also only starts after activation.
After recording has started, the Recording status field shows the entry Running.
120
Configure Tab, Recorders - Start/Stop
Settings for Start and Stop of Recorders
Default Setting
Start next 10th minute
–
–
Setting Range
Start next minute
Start next 10th minute
Start immediately
Start next hour
Start next day
Display of the start time in:
Depends on the configuration of date/
time format.
Not settable
Status display of recorder started or
recorder stopped
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A8, Edition 09.2020