Table of Contents
Advertisement
Even if you move the map while you are driving, Nextar Navigation System
Note!
continues navigating if there is an active route: it plays the voice instructions
and displays the turn preview icons according to your current GPS position.
2.4.2.3 Selected location (Cursor)
If you select a location in the Find menu, or you tap the map when the map control buttons
are visible, the Cursor appears at the selected point on the map. Nextar Navigation System
displays the Cursor with a radiating red dot (
when it is in the background of a 3D map view.
When the Cursor is set, tap
one of the following:
•
the start point of a route
•
a via point in a route
•
the destination of a route
You can also search for POIs around the Cursor.
Or you can save the location of the Cursor as:
•
a Favorite
•
a POI
•
a map marker Pin
2.4.2.4 Original position in the Cursor menu
When the Cursor menu is open, a special icon (
was opened with.
You can move and zoom the map, and you can set the Cursor to a different place. The usual
Cursor (
) appears, and the buttons of the Cursor menu initiate actions for this new
location.
To return to the original Cursor position, tap
which the Cursor menu was opened, and the
2.4.3 Daytime and night color profiles
Nextar Navigation System uses different color profiles during the day and during the night.
•
Daytime colors are similar to paper road maps.
•
The night color profiles use dark colors for large objects to keep the average
brightness of the screen low.
Nextar Navigation System offers different daytime and night color profiles. It can also switch
automatically between the daytime and the night scheme based on the current time and GPS
) to make it visible at all zoom levels, even
. The Cursor menu appears and you can use the Cursor as
) shows the Cursor position the menu
. The map jumps back to the position with
icon appears again.
20
Advertisement
Table of Contents
