Getting A Gps Signal - Nextar X3-02 - Automotive GPS Receiver Manual

To start the system:
1 Press the POWER button. The screen appears.
2 Tap Navigate. A warning screen appears.
3
Tap "I Agree" after you have read and agreed to the
warning. The map view appears and you are ready to
set your first destination!

Getting a GPS signal

To use the system to guide you to a destination, the system's GPS antenna must be
receiving signals. GPS signals can be obstructed by ceilings, trees, and nearby tall
buildings. Signals can also be obstructed by the roof of your vehicle. For best results,
position your system where it has a clear view of the sky.
- 3 -