Table of Contents
Advertisement
14-16 Administration Guide
Return/Enter to modify an existing Trap Receiver.
Navigate from here to view, add, modify and delete IP Trap Receivers.
Setting the IP trap receivers
1.
Select Add IP Trap Receiver.
2.
Select Receiver IP Address or Domain Name. Enter the IP address or domain name of the SNMP manager
you want to receive the trap.
3.
Select Community String if you enabled one in the SNMP Setup screen, and enter the appropriate
password.
4.
Select Add Trap Receiver Now and press Return. You can add up to seven more receivers.
Viewing IP trap receivers
To display a view-only table of IP trap receivers, select Display/Change IP Trap Receiver in the IP Trap
Receivers screen.
Modifying IP trap receivers
1.
To edit an IP trap receiver, select Display/Change IP Trap Receiver in the IP Trap Receivers screen.
2.
Select an IP trap receiver from the table and press Return.
3.
In the Change IP Trap Receiver screen, edit the information as needed and press Return.
Deleting IP trap receivers
1.
To delete an IP trap receiver, select Delete IP Trap Receiver in the IP Trap Receivers screen.
2.
Select an IP trap receiver from the table and press Return.
3.
In the dialog box, select Continue and press Return.
IP Trap Receivers
Display/Change IP Trap Receiver...
Add IP Trap Receiver...
Delete IP Trap Receiver...
Advertisement
Table of Contents
