Netopia 4753 2A4NA Administration Manual page 117

G.shdsl integrated access device
Hide thumbs Also See for 4753 2A4NA:
Table of Contents

Advertisement

The Add NAT Public Range screen appears.
Range Name:
Type...
Public Address:
First Public Port:
Last Public Port:
ADD NAT PUBLIC RANGE
Select Range Name and give a descriptive name to this range.
Select Type and from the pop-up menu, assign its type. Options are static, dynamic, or pat (the default).
If you choose pat as the range type, select Public Address and enter the exterior IP address in the
range you want to assign. Select First and Last Public Port and enter the first and last exterior ports
in the range. These are the ports that will be used for traffic initiated from the private LAN to the out-
side world.
Note: For PAT map lists and server lists, if you use the Public Address 0.0.0.0, the list will acquire its public IP
address from the WAN IP address specified by your WAN IP configuration in the Connection Profile. If that is a
static IP address, then the PAT map list and server lists will acquire that address. If it is a negotiated IP
address, such as may be assigned via DHCP or PPP, the PAT map list and server lists will acquire that address
each time it is negotiated.
If you choose dynamic as the range type, a new menu item, First Public Address, becomes visible.
Select First Public Address and enter the first exterior IP address in the range you want to assign.
Select Last Public Address and enter an IP address at the end of the range.
If you choose static as the range type, a new menu item, First Public Address, becomes visible.
Select First Public Address and enter the first exterior IP address in the range you want to assign.
Select Last Public Address and enter an IP address at the end of the range.
Select ADD NAT PUBLIC RANGE and press Return. The range will be added to your list and you will be
returned to the Network Address Translation screen.
Note: We recommend that you use the pre-existing Easy PAT List which includes the default PAT rule and add
your mappings to this.
Add NAT Public Range
my_first_range
pat
206.1.1.6
49152
65535
CANCEL
Multiple Network Address Translation 11-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

4753

Table of Contents